Stainless steel cutting and machining under one roof

For many companies in the manufacturing industry, stainless steel cutting is a critical link in the production chain, especially when specific dimensions and grades are required at short notice. If that availability comes under pressure, your entire process is immediately delayed.

That is why companies choose the Roba Metals Plate Center in Aalten. By bringing cutting and processing techniques together under one roof, we help keep your production efficient and predictable.

What you will notice above all is peace of mind. You no longer need to coordinate several suppliers for material, cutting, finishing and machining. Instead, you have one partner who manages the process, monitors progress closely and communicates clearly. This means fewer handovers, less risk and greater control over planning and costs.

Applications by industry

Our Plate Center serves companies that need stainless steel platework that meets their requirements in terms of dimensions, quality and lead time. We work extensively for mechanical engineering companies, the semiconductor industry, tank and equipment manufacturers and companies in the food, energy, oil and gas, petrochemical and marine sectors. The same principle applies in all these industries: if specific dimensions or grades are not available on time, the entire process is immediately affected.

That is precisely why you need more than just a cut component. You need a reliable process from enquiry to delivery. We supply stainless steel plates, semi-finished products and machined components as required, ready to proceed directly to assembly, installation or further processing.

From enquiry to predictable delivery

A successful outcome starts with the right approach. We therefore begin with your requirements and translate them directly into the appropriate material and cutting schedule. Our extensive stock of plates up to 150 millimetres thick in a range of grades enables us to respond quickly. This shortens lead times and provides additional assurance when your schedule leaves little room for delays.

Behind the scenes, we keep a close eye on your order. We monitor progress, coordinate where necessary and ensure that agreed commitments are kept. For buyers, production planners and production teams, this primarily means one thing: transparency. You know the status of your order and what to expect at each stage.

One Plate Center, multiple processes: combined logically

Not every stainless steel project requires the same approach. Sometimes speed is the key priority. Sometimes cutting quality and preservation of the material structure matter most. In other cases, you need complete machined components that can proceed directly to the next stage of your process. At the Plate Center, we combine cutting and processing techniques into one controlled production route, so you do not need to organise separate stages yourself.

You select the cutting technique that best suits your product: plasma or waterjet cutting. We use these techniques to cut stainless steel entirely to size, with optional weld preparations or concentric holes produced in a single operation.

We then provide the required finishing. Deburring is used to remove burrs or sharp edges, while grinding is used when surface quality, cleanability or a specific finish is important.

Our processes

  • Waterjet cutting of stainless steel
    When cutting quality and preservation of the material structure are the highest priorities, waterjet cutting is often the best option. It is a cold cutting process with no heat input, which preserves the structure of the stainless steel and delivers a high cutting quality.
  • Plasma cutting of stainless steel
    When speed and efficiency are the deciding factors, we use plasma cutting. This allows you to select the cutting technique that best suits your product and application.
  • Stainless steel deburring and grinding
    After cutting, we provide the finishing required for your application. Deburring is used to remove burrs and sharp edges. Grinding is used when a smoother surface, improved cleanability, a uniform finish or a specified Ra value is required.
  • Mechanical processing of stainless steel: five-axis machining
    Our CNC machine shop focuses on producing high-quality components and semi-finished products. For complex shapes, we use a combination of turning, milling, drilling and tapping. From flanges and tube sheets to discs and custom components manufactured to specification.

Would you prefer to start with the complete overview and compare the techniques more easily?

What we supply

You receive stainless steel components and semi-finished products such as rings, tube sheets, flanges, discs and custom shapes, supplied exactly as you need them. These can be delivered as a one-off order or on a call-off basis. This saves valuable time, reduces pressure on your own production and gives you greater control over planning and costs.

Quality, inspection and certification

Every order is subject to rigorous inspection. This is not a separate final check, but an integral part of a controlled process. We also monitor progress closely and provide certification options and additional inspections when required for your application. This means that you receive components that are not only correct on paper, but that you can rely on in practice.

Read more about quality and certification

Plate Centre Brochure

Curious about all the possibilities of the Roba Metals Plate Centre? Read about them in our brochure.

View the brochure

Frequently asked questions